Toggle Menu

 

  • Home /
  • Cooking /
  • Cooktops /
  • Specialty Cooktops /
  • Gaggenau 400 series Vario 400 series gas cooktop Stainless steel Width 15" (38 cm) Natural gas. For conversion to LP gas, LP kit (part #423414) must be ordered.

VG425211CA Gaggenau 400 series Vario 400 series gas cooktop Stainless steel Width 15" (38 cm) Natural gas. For conversion to LP gas, LP kit (part #423414) must be ordered.

Model No: VG425211CA

Gaggenau 400 series Vario 400 series gas cooktop Stainless steel Width 15" (38 cm) Natural gas. For conversion to LP gas, LP kit (part #423414) must be ordered. with 1 - 13.6K BTU Two Ring Burner , 1 - 6.8K BTU Two-Ring Burner , Automatic Quick Ignition , High Output and Simmer Functions , Continuous Cast Iron Grate

Dimensions: 5 1/4" H x 20 1/2" D x 14 15/16" W

Call us at 888-487-2298 for pricing and/or ordering information.

Cooking zones

  • 1 two-ring high output burner (570 - 13,600 BTU), suitable for pots up to max. 11".
  • 1 two-ring standard output burner (570 - 6,800 BTU), suitable for pots up to max. 9 7/16".
  • Operation
  • Control knobs with illuminated ring, cooking zone and output level markings.
  • One-handed operation.
  • Full electronic control in 12 output levels for exact power level regulation plus simmer function.
  • Automatic quick ignition.
  • Features
  • Simmer function.
  • Cast-iron pan support with flat, continuous pot surface.
  • Brass burner rings.
  • Safety
  • Electronic flame monitoring with automatic re-ignition.
  • Residual heat indication.
  • Safety shut-off.
  • Planning notes
  • Depending on the type of installation - surface-/ or flush-mounted, with or without cover - the specific location of the control knob positions may vary.
  • When using the appliance cover VA 440 or adjustment strip VA 450 additional space for cut-out depth needs to be considered.
  • In a combination of Vario cooktops with at least one appliance cover, the adjustment strip VA 450 is required.
  • In a combination of several Vario 400 series cooktops a connection strip VA 420 must be used. Depending on the type of installation- surface- or flush-mounted, with or without cover - the respective VA 420 connecting strip must be used.
  • For flush installation the edge height
    in the cut-out needs to be at least 1/2"
    and for surface-mount 3/8". Ensure a
    continuous cut surface of 90(degree).
  • The weight capacity and stability,
    especially in case of thin countertops,
    must be supported using suitable
    substructures. Take the appliance
    weight and additional loads into
    account.
  • Flush installation is possible in countertops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the edges must be observed. For other materials, please consult with your countertop manufacturer.
  • The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
  • The joint width may vary due to size tolerances of the combinations and of the countertop cut-out.
  • If installing several Vario products in individual cut-outs allow for a minimum distance of 2" between the cooktops. Control knobs to be integrated in the
    base cabinet at drawer level.
    Panel thickness 5/8" - 1".
  • The adjacent drawing "Installation of the control knob" must be observed if the panel is more than 1" thick. There must be a recess at the rear for proper electronic knob installation.
  • Plan for an electrical connection (the appliance is not operable without power supply).
  • Air intake from above.
  • No intermediate shelf required.
  • The rear panel must consist of a non-flammable material. Wall trims must be resistant to heat.
  • The minimum distance from the side of appliance edge to the wall or furnishing components must be at least 6".
  • When used with VL 414 downdraft ventilation, the air deflector AA 414 is recommended to ensure maximum permance of the cooktop.
  • Minimum distance between gas cooktop and ventilation hood must be 30".
  • Appliance can be snapped into the worktop from above.
  • Rating
  • Total rating 20,500 BTU (6.0 KW).
  • Total Amps: 2 A.
  • 120 V / 60 Hz
  • Connecting cable 55" with plug.
  • Appearance

    Black Cast-Iron Continuous Grates
    Stainless Steel Cooktop Surface

    Controls

    Automatic Re-Ignition
    Electronic Power Control with 12 Output Levels
    One Handed Operation Controls
    Residual Heat Indicator

    Cooktop Features

    1 - 13,600 BTU High Output Two-Ring Burner
    1 - 6,800 BTU Standard Two-Ring Burner
    Automatic Fast Ignition
    Brass Burner Rings
    Simmer Function

    Convenience Features

    Electronic Flame Monitoring
    Safety Shut-Off

    Additional Features

    Surface-Mount or Flush-Mount Installation

    Energy/power

    Gas Cooktop

    Dimensions

    5 1/4" H x 20 1/2" D x 14 15/16" W

    Automatic quick ignition, electronic flame monitoring with automatic re-ignition
    Full electronic gas valves for precise and reproducible power regulation
    Full electronic power level regulation on 12 levels
    Simmer function for cooking on a very low output level
    Two-ring burnera with up to 13,600 BTU.

    No rebates currently available for this model.

    No reviews available.
    CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Agoura Hills

    Moorpark

    Oxnard

    Santa Barbara

    Torrance

    For all your appliance service needs, visit:All Brand Appliance