Toggle Menu

VP414610 Gaggenau 400 series Vario 400 series teppan yaki Stainless steel Width 15 '' (38 cm)

Model No: VP414610

Gaggenau 400 series Vario 400 series teppan yaki Stainless steel Width 15 '' (38 cm) with 2 - 1500W Zones , Keep Warm Setting , Control Knobs with Safety Shut Off , 12 3/16" W x 17 5/16" D Usable Area , 240 °F to 480 °F Temp Control

Call us at 888-487-2298 for pricing and/or ordering information.

Cooking zones

  • Cooking area W 12 3/16 " x D 17 5/16 ".
  • Operation
  • Two control knobs with illuminated ring, cooking position and output marking.
  • Electronic temperature control up to 480(degree)F plus warming plate function.
  • Features
  • Two zones, each 1500 W, can be operated together as a complete surface or each halve separately.
  • Simple to clean surface.
  • Keeping warm setting.
  • Safety
  • Safety shut-off.
  • Planning notes
  • Depending on the type of installation - surface-/ or flush-mounted, with or without cover - the specific location of the control knob positions may vary.
  • When using the appliance cover VA 440 or adjustment strip VA 450 additional space for cut-out depth needs to be considered.
  • In a combination of Vario cooktops with at least one appliance cover, the adjustment strip VA 450 is required.
  • In a combination of several Vario 400 series cooktops a connection strip VA 420 must be used. Depending on the type of installation- surface- or flush-mounted, with or without cover - the respective VA 420 connecting strip must be used.
  • For flush installation the edge height
    in the cut-out needs to be at least 1/2"
    and for surface-mount 3/8". Ensure a
    continuous cut surface of 90(degree).
  • The weight capacity and stability,
    especially in case of thin countertops,
    must be supported using suitable
    substructures. Take the appliance
    weight and additional loads into
    account.
  • Flush installation is possible in countertops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the edges must be observed. For other materials, please consult with your countertop manufacturer.
  • The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
  • The joint width may vary due to size tolerances of the combinations and of the countertop cut-out.
  • If installing several Vario products in individual cut-outs allow for a minimum distance of 2" between the cooktops.
  • Built-in control panel to be integrated in the bottom cabinet at drawer level.
  • Panel thickness 5/8 " - 1 ".
  • The adjacent drawing "Installation of the control knob" must be observed if the panel is more than 1 " thick (there
    must be a recess at the rear for proper
    control module installation).
  • Above countertop minimum clearance of at least 1 9/16 '' from adjacent heat-sensitive furniture or contact surfaces must be observed or thermal insulation must be installed.
  • Appliance can be snapped into the worktop from above.
  • Rating
  • Total rating: 208/220 - 240 V : 3.7 kW. 60 Hz
  • Total Amps: 12,60 A.
  • Plan for 47 1/4" connecting cable without plug (hardwire required)
  • Exact temperature control up to 480 (degree)F
    Hard chrome-plated surface for teppan cooking and use as griddle, grill, searer and warming plate. No pots or pans necessary.
    Optimum heat distribution
    Precision crafted 1/8-inch stainless steel frame
    Solid stainless steel control knobs

    No rebates currently available for this model.

    No reviews available.
    CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Agoura Hills

    Moorpark

    Oxnard

    Santa Barbara

    Torrance

    For all your appliance service needs, visit:All Brand Appliance